{"title":"Coarse Cross Cut - SG (HP Carbide Cutters)","description":"","products":[{"product_id":"7050-060hp","title":"7050.060HP Coarse Cross Cut - SG","description":"\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 11.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eFor efficient reduction of resins including tray materials.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492029284603,"sku":"7050.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/7050-060hp-scaled.jpg?v=1757002163"},{"product_id":"5850-060hp","title":"5850.060HP Coarse Cross Cut - SG","description":"\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 12.5mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eFor efficient reduction of resins including tray materials.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492061200635,"sku":"5850.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5850-060hp-scaled.jpg?v=1757002288"},{"product_id":"5650-045hp","title":"5650.045HP Coarse Cross Cut - SG","description":"Crosscut toothing designed for rapid bulk trimming on acrylic \u0026amp; plaster.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 045mm\n\nHead Length: 12.9mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eFor efficient reduction of resins including tray materials.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492066902267,"sku":"5650.045HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5650-045hp-1-scaled.jpg?v=1757002311"},{"product_id":"5550-060hp","title":"5550.060HP Coarse Cross Cut - SG","description":"Crosscut toothing designed for rapid bulk trimming on acrylic \u0026amp; plaster.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 15.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eFor efficient reduction of resins including tray materials.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492075454715,"sku":"5550.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5550-060hp-scaled.jpg?v=1757002341"},{"product_id":"5450-060hp","title":"5450.060HP Coarse Cross Cut - SG","description":"Crosscut toothing designed for rapid bulk trimming on acrylic \u0026amp; plaster.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 13.9mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eFor efficient reduction of resins including tray materials.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492085121275,"sku":"5450.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5450-060hp-scaled.jpg?v=1757002380"},{"product_id":"5250-060hp","title":"5250.060HP Coarse Cross Cut - SG","description":"Crosscut toothing designed for rapid bulk trimming on acrylic \u0026amp; plaster.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 12.2mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eFor efficient reduction of resins including tray materials.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492089708795,"sku":"5250.060HP","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5250-060hp-scaled.jpg?v=1757002397"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/collections\/Coarse-Cross-Cut-SG-scaled.jpg?v=1765515256","url":"https:\/\/straussdiamond.com\/collections\/coarse-cross-cut-sg-hp-carbide-cutters.oembed","provider":"StraussDiamond","version":"1.0","type":"link"}