{"title":"Fine Cross Cut - EF (HP Carbide Cutters)","description":"","products":[{"product_id":"7720-029hp","title":"7720.029HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 029mm\n\nHead Length: 5.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492018340091,"sku":"7720.029HP","price":23.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/7720-029hp-scaled.jpg?v=1757002114"},{"product_id":"7720-023hp","title":"7720.023HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 023mm\n\nHead Length: 5.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492018733307,"sku":"7720.023HP","price":23.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/7720-023hp-scaled.jpg?v=1757002117"},{"product_id":"7220-060hp","title":"7220.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 14.2mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492021977339,"sku":"7220.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/7220-060hp-scaled.jpg?v=1757002136"},{"product_id":"7120-023hp","title":"7120.023HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 023mm\n\nHead Length: 2.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492022403323,"sku":"7120.023HP","price":23.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/7120-023hp-scaled.jpg?v=1757002140"},{"product_id":"7020-060hp","title":"7020.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 11.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492029907195,"sku":"7020.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/7020-060hp-scaled.jpg?v=1757002166"},{"product_id":"6420-031hp","title":"6420.031HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 031mm\n\nHead Length: 11.5mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492034035963,"sku":"6420.031HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/6420-031hp-scaled.jpg?v=1757002190"},{"product_id":"6320-060hp","title":"6320.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 9.5mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492034593019,"sku":"6320.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/6320-060hp-scaled.jpg?v=1757002195"},{"product_id":"6120-040hp","title":"6120.040HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 040 mm\n\nHead Length: 9 mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492035805435,"sku":"6120.040HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/6120-040hp-scaled.jpg?v=1757002204"},{"product_id":"5820-060hp","title":"5820.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060 mm\n\nHead Length: 12.5 mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492062511355,"sku":"5820.060HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5820-060hp-scaled.jpg?v=1757002293"},{"product_id":"5720-040hp","title":"5720.040HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 040mm\n\nHead Length: 14.1mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492066476283,"sku":"5720.040HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5720-040hp-scaled.jpg?v=1757002308"},{"product_id":"5620-045hp","title":"5620.045HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 045mm\n\nHead Length: 12.9mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492067000571,"sku":"5620.045HP","price":28.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5620-045hp-scaled.jpg?v=1757002312"},{"product_id":"5420-060hp","title":"5420.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 13.9mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492086825211,"sku":"5420.060HP","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5420-060hp-scaled.jpg?v=1757002384"},{"product_id":"5320-060hp","title":"5320.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 12.2mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492087742715,"sku":"5320.060HP","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5320-060hp-scaled.jpg?v=1757002387"},{"product_id":"5220-060hp","title":"5220.060HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 060mm\n\nHead Length: 12.2mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492090200315,"sku":"5220.060HP","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/5220-060hp-scaled.jpg?v=1757002400"},{"product_id":"1820-023hp","title":"1820.023HP Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 023mm\n\nHead Length: 4.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492093772027,"sku":"1820.023HP","price":24.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/1820-023hp-scaled.jpg?v=1757002417"},{"product_id":"1620-014hp","title":"1620.014HP - Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 014mm\n\nHead Length: 3.1mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492096262395,"sku":"1620.014HP","price":22.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/1620-014hp-scaled.jpg?v=1757002431"},{"product_id":"1220-016hp","title":"1220.016HP - Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 016mm\n\nHead Length: 8.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492099014907,"sku":"1220.016HP","price":22.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/1220-016hp-scaled.jpg?v=1757002445"},{"product_id":"0420-023hp","title":"0420.023HP - Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 023mm\n\nHead Length: 16.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492107108603,"sku":"0420.023HP","price":24.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/0420-023hp-scaled.jpg?v=1757002479"},{"product_id":"0220-23hp","title":"0220.023HP - Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 023mm\n\nHead Length: 16.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492108943611,"sku":"0220.023HP","price":24.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/0220-23hp-scaled.jpg?v=1757002485"},{"product_id":"0120-023hp","title":"0120.023HP - Fine Cross Cut - EF","description":"Suitable for all dental materials. It smooths the surface and it enables accurate operation on any structure.\n\u003ch3\u003eMeasurements:\u003c\/h3\u003e\nHead Size: 023mm\n\nHead Length: 14.0mm\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n \t\u003cli\u003eDesigned for fine cutting on all metals, acrylic and stone.\u003c\/li\u003e\n \t\u003cli\u003eTungsten carbide instruments for precise preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\nOptimum material reduction and a high-quality surface finish on all types of material. The optimally\ncoordinated blade geometry and cutter designs ensure a long service life and high cutting capacity when preparing stone, acrylic, metal, precious metal, titanium or porcelain.\n\nThe specially developed blades with relief channels made from high-grade HIP tungsten carbide alloy are extremely cost-effective.\n\u003ch3\u003eOperating Information\u003c\/h3\u003e\n\u003ch4\u003eCorrect application\u003c\/h4\u003e\n\u003cul\u003e\n \t\u003cli\u003eUse only technically perfect, serviced handpieces.\u003c\/li\u003e\n \t\u003cli\u003eClean the handpiece chuck regularly.\u003c\/li\u003e\n \t\u003cli\u003eInstruments must be inserted as far as possible.\u003c\/li\u003e\n \t\u003cli\u003eUse eye-shield and dust-extraction.\u003c\/li\u003e\n \t\u003cli\u003eInstruments should reach the operating speed before\nthey are applied to the work piece.\u003c\/li\u003e\n \t\u003cli\u003eAvoid canting or levering the instrument as this\nincreases the risk of breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWorking Pressure\u003c\/h4\u003e\nExcessive working pressure must be avoided.\nPressure: 0.2 – 5 N\n\u003ch4\u003eWorn Instruments\u003c\/h4\u003e\nFractured and incorrectly shaped blades cause vibrations.\nBent or non-concentric rotary instruments must be\ndisposed of.\n\u003ch4\u003eRecommended Speeds\u003c\/h4\u003e\nNon-adherence to the maximum permissible speeds\nincreases the risk of accidents.\nPlease Note:\nUsing cutters marked with the indentation codes 50 - 85\nthe grinding movements must be done under constant\npressure operating the instrument at the recommended\nspeed.\nDanger of Injury – soft, timid or hesitant use of large\nintended instruments causes rock or toss vibration with\nthe possibility of a shaft breakage.","brand":"StraussDiamond","offers":[{"title":"Default Title","offer_id":47492110090491,"sku":"0120.023HP","price":24.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/files\/0120-023hp-scaled.jpg?v=1757002492"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/6727\/5003\/collections\/Fine-Cross-Cut-EF-scaled.jpg?v=1765515491","url":"https:\/\/straussdiamond.com\/collections\/fine-cross-cut-ef-hp-carbide-cutters.oembed?page=2","provider":"StraussDiamond","version":"1.0","type":"link"}