Instructions for reprocessing

Strauss Diamonds Burs Instructions for Use:

For the safety of user and patient, it is highly recommended that only qualified dentists should work with dental diamond burs.

• Attention should be paid to speed of work (RPM). In particular when working with a large head diameter and coarse or super coarse grit size.

• Using a bur with too high RPM level, could generate undesirable heat.

• Do not force a bur into the turbine. In case of difficult access, check both turbine and bur. Remember- Strauss Diamond burs are guaranteed and shall be replaced if found incompatible. However, special attention should be paid to instructions of use and maintenance of the turbine.

• Strauss Diamonds burs and carbide burs are designed for several uses and are autoclavable.

• Please note the FG mark on the package indicating the use in high speed turbine.

• Use the bur with sufficient water coolant.

• Apply a feather touch (up to 150 gram) while working with the bur.

• Do not keep the bur still on one spot.

• Keep constant movement to avoid burning of the bur.